# # Sample Laptop Configuration # for lenlen.ntc.keio.ac.jp (Toshiba Libretto 50CT) # Tatsumi Hosokawa # # Note: wlp and scc drivers are not configured without # without installing these drivers (because they make # the size of sys.patch in PAO-boot.flp larger). # machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident GENERIC maxusers 10 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MFS #Memory Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor #options SYSVSHM #options SYSVSEM #options SYSVMSG # laptop-specific configuration options LAPTOP # If your laptop have not had Windoze95-Ready BIOS, please update it. # Such old BIOS'es sometimes have critical bugs at 32-bit protected # mode APM BIOS interface (which have not used by Windoze 3.1). # PC-card suspend/resume support (experimental) #options APM_PCCARD_RESUME #options PCIC_RESUME_RESET # Keep power for serial cards when the system suspends # (If your machine hangs up when you try to suspend the system with # FAX/Modem PCMCIA card, uncomment this option). #options SIO_SUSP_KEEP_PWR # Detach SCSI devices when the SCSI card is removed #options SCSI_DETACH # Japanese version of WaveLAN PCMCIA uses 2.4GHz band instead of 915MHz # band that US version uses. If you want to use Japanese version of # WaveLAN, uncomment this line, or edit the corresponding config entry # of /etc/pccard.conf. #options "WAVELAN_PCMCIA_24" # Suspend the system when the battery status is "Low" #options "APM_BATT_LOW_SUSPEND" # If you want to use NTP on laptop machines, uncomment the following # option. Current APM implementation affects NTP client. #options "APM_NO_CLOCK_ADJUST" # Don't suspend the system immediately before the system is resumed # from suspended mode (Default 3 seconds) options "APM_NOSUSPEND_IMMEDIATE=3" # Some X-server cannot survive suspend/resume on laptop. # This option kicks her when the system is resumed from suspended mode. #options SYSCONS_VTY_RESUME # This option is totally untested, but it's necessary for Mitsubishi # AMiTY CN. # (This breaks Chandra's CardBus slot support, so it is commented out # by default) #options "PCIC_TI113X_FUNC" config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 # Dont remove these two lines! controller card0 device pcic0 at card? device pcic1 at card? # If your machine says that PC-cards are inserted and removed frequently # even if you don't insert or remove the cards, please try to specify # the IRQ of PCIC explicitly. #options "PCIC_IRQ=12" # for machines with serial trackball #options "PCIC_IRQ=0" # zero means no IRQ mode # Some PCMCIA-PCI bridge has peculiar I/O address (default: 0x3e0). # If you want to specify I/O address explicitly, uncomment and edit the # following line (for example, I/O address of PCMCIA bridge of SOTEC # Winbook Quattro/V is 0x3000). To know this value, please read the # manual of your laptop or device property of PCMCIA bridge from # Windows95's device control panel. #options "PCIC_IO=0x3000" # for Sotec Winbook Quattro/V controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd1 at wdc1 drive 0 controller wdc2 at isa? disable port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc2 drive 0 controller wdc3 at isa? disable port "IO_WD2" bio irq 15 vector wdintr disk wd3 at wdc3 drive 0 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM #device wfd0 #LS-120 #controller ncr0 #controller ahb0 #controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller spc0 at isa? port 0x320 bio irq 11 iomem 0xd0000 flags 0x01 vector spcintr # Future domain and Q-logic PC-card SCSI drivers # ported from NetBSD/pc98 (based on NetBSD 1.2) options SCSI_LOW # XXX: for ncv? and stg? driver controller ncv0 at isa? port 0x320 bio irq 5 vector ncvintr controller stg0 at isa? port 0x320 bio irq 5 vector stgintr controller scbus0 device sd0 device od0 #See LINT for possible `od' options device st0 device cd0 #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 #options XSERVER # include code for XFree86 # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x01 irq 13 vector npxintr # # Laptop support (see LINT for more options) # #device apm0 at isa? # Advanced Power Management #options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device sio4 at isa? disable port "IO_COM3" tty irq 5 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device lpt1 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr #device psm0 at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr #device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 #device fxp0 #device vx0 device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr #device ed1 at isa? disable port 0x300 net irq 5 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr device ep0 at isa? port 0x300 net irq 10 vector epintr #device ep1 at isa? disable port 0x300 net irq 10 vector epintr device fe0 at isa? port 0x300 net irq 10 vector feintr #device fe1 at isa? disable port 0x300 net irq 10 vector feintr #device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr device sn0 at isa? port 0x300 net irq 10 vector snintr #device sn1 at isa? disable port 0x300 net irq 10 vector snintr #device wlp0 at isa? port 0x300 net irq 11 vector wlpintr #device wlp1 at isa? disable port 0x300 net irq 11 vector wlpintr # do not enable ze0 and zp0 (these devices are obsolete) ##device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr ##device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr # IBM Smart Capture PCMCIA card #device scc0 at isa? port 0x240 irq 10 iomem 0xd4000 vector sccintr #device scc1 at isa? disable port 0x244 irq 11 iomem 0xd8000 vector sccintr # Hitachi microcomputer system Speach Synthesizer card #device hss0 at isa? port? #device hss1 at isa? port? pseudo-device loop pseudo-device ether #pseudo-device log pseudo-device sl 1 # DHCP uses BPF (Berkeley Packet Filter) #pseudo-device bpfilter 4 # ijppp uses tun instead of ppp device #pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's #pseudo-device vn #Vnode driver (turns a file into a device) #options DDB # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. #options KTRACE #kernel tracing